List of ETJump client commands
Below is a list of all available ETJump related console commands for players.
ad_save
ad_save [optional name]
Saves the current temp demo recorded by autodemo with the given name. The manually saved autodemo naming format is playername_map_name[DD-MM-YY-HHMMSS]
. If no name is given, defaults to demo
.
Note: This only saves the latest temp demo recorded with etj_autoDemo
. If you are manually recording a demo and use this command, it will take the latest temp/temp_N.dm_84
and save that. The manually recorded demo will be saved normally into whatever folder you're recording into, with the name it was recorded with.
await
await [frames] [command1] | [command2] | [command3]...
Queues commands to be executed after [frames]
. Unlike wait
, this works asynchronously without interrupting other user actions.
Note: await
cannot be used during timeruns, and queued commands are cleared when a timerun starts.
backup
backup [slot]
Loads a backup slot. Possible slots 1-3. If no slot is given, loads slot 1.
call
call [player]
Teleports target player to you.
chs
chs
Prints the list of available CHS infos to console.
class
class [class] [weapon]
Changes to class with weapon. Possible classes are s, e, m, f, c. Possible weapons are 1-7.
clearsaves
clearsaves
Clears users saved positions in all slots.
Note: Removes saved slots on both teams.
customvotes, listinfo
customvotes [list]
Lists all callvote custom map vote lists. If [list]
is given, lists the maps on the specified list.
cv
cv
Alias for callvote
.
extraTrace
extraTrace
Prints the list of bitmask values for etj_extraTrace
.
goto
goto [player]
Teleports you to target player.
ignore and unignore
ignore/unignore [player/ID]
Ignores/unignores chat and private messages sent by specified client.
incrementVar
incrementVar [cvar] [start] [end] [step]
Cycles given cvar between values of start
and end
with increments of step
. Same as cycle
, but supports float values.
interruptRun
interruptRun
Interrupts a currently active timerun.
iwant
iwant [player]
Same as call.
listspawnpt
listspawnpt
Lists all valid spawnpoints in the map. The value in [brackets] indicates the spawnpoint number (used with setspawnpt
) and the letters A and X indicate if the spawnpoint belongs to Allies or Axis, respectively.
load
load [slot]
Loads a previously saved position. Possible slots 0-2. If no slot is given, loads slot 0.
loadcheckpoints
loadcheckpoints [run name]
loadcheckpoints [run name] [rank]
Loads timerun checkpoints for comparison for given timerun. If [rank]
isn't specified, defaults to rank 1 time. Loaded checkpoints can be cleared by specifying -1
as rank. [run name]
supports partial matching.
man and manual
manual [command]
Prints a manual for command.
min and minimize
min
, minimize
Minimizes the ET client. Only works on Windows.
mod_information
mod_information
Prints the ETJump version the server is running.
nocall
nocall
Toggles whether other players are allowed to call you.
nogoto
nogoto
Toggles whether other players can teleport to you.
ob_save, ob_load, ob_reset, ob_list
ob_save [name]
ob_load [name]
ob_reset
ob_list
Manages overbounce watcher coordinates. ob_save [name]
will save a coordinate with the given name. ob_load [name]
loads a saved coordinate with given name. ob_reset
clears all saved positions. ob_list
displays all saved coordinates.
portal
portal
Prints information about portal gun.
rankings
rankings [season]
rankings --season [season] --page [page] --page-size [page size]
Prints timerun rankings. If no parameters are given, prints top 20 overall rankings.
ranks, records, times and top
records [run name]
records [map name] [run name]
records [season] [map name] [run name]
records --season [season] --map [map name] --run [run name] --page [page] --page-size [page size]
Prints timerun records with given parameters. If [run name]
isn't specified, prints top 3 records of all timeruns in the map. If specified, will print top 20 records for given run. If [season]
isn't specifed, prints overall records. [run name]
, [map name]
and [season]
support partial name matching.
Note: ranks
, reconds
, times
and top
are all valid aliases for this command.
resetmaxspeed
resetmaxspeed
Resets the maximum speed displayed at speedmeter 1.
resetJumpSpeeds
resetJumpSpeeds
Queues reset for jump speeds display. This command is automatically executed upon death, team change, save
and load
. The display will reset on next jump event.
resetStrafeQuality
resetStrafeQuality
Queues reset for strafe quality display. This command is automatically executed upon death, team change, save
and load
. The display will reset the next time you're in air or on slick.
resetUpmoveMeter
resetUpmoveMeter
Resets the upmove meter display. This command is automatically executed upon death, team change, save
and load
.
rtvVote
rtvVote [number]
Casts a vote for the map specified by [number]
in an ongoing Rock The Vote.
save
save [slot]
Saves current position. Possible slots 0-2. If no slot is given, slot is 0.
setoffset
setoffset [X Y Z]
Offsets your position by the amount of units on each vector. Usage requires access to noclip
. Maximum offset value per vector is 4096.
specinvite, specuninvite
specinvite [name/clientnum]
, specuninvite [name/clientnum]
Invites/uninvites specified client to spectate you.
speclist
speclist
Prints a list of clients who are allowed to spectate you while speclocked.
speclock, specunlock
speclock
, specunlock
Locks/unlocks you from spectators. When locked, use specinvite/specuninvite
to invite/uninvite clients to spectate you.
tracker_print
tracker_print [index1|all] [index2] [index3]...
Prints your current tracker values on given indices. Special case all
prints tracker values on every index. If no index is specified, defaults to index 1.
Note: Usage of this command requires the server to have g_debugTrackers 1
. Timerun records are not saved when tracker debugging is enabled.
tracker_set
tracker_set [index|all] [value]
Sets your tracker on given index to specified value. Special case all
sets specified value in all indices. If no index is specified, defaults to index 1.
Note: Usage of this command requires the server to have g_debugTrackers 1
. Timerun records are not saved when tracker debugging is enabled.
unload
unload
Undo your last load
command and teleport back to the position you last executed a load from. The position must be a valid position for using save
(e.g. cannot use unload
to teleport to an area where you cannot save
).
Note: unload
cannot be used during timeruns. There is only a single slot available, which is overwritten on every successful load
command.